Current offers: Crankshaft slave

Fitting Position: transmission sided, Inner diameter 1 [mm]: 85, Outer diameter 1 [mm]: 131, Outer diameter 2 [mm]: 152, Height 1 [mm]: 15,7, Material: PTFE (polytetrafluoroethylene), Supplementary Article/Info 2: with flange, with mounting sleeves

Material: PTFE (Politetrafluoretylene) with a mounting spa Material: PTFE (polytetrafluoroethylene), Supplementary Article/Info 2: with flange, Inner Diameter [mm]: 50, Outer Diameter [mm]: 90

Material: FPM (fluoride rubber), Inner diameter [mm]: 26, Outer diameter [mm]: 42, Height [mm]: 8, Radial Shaft Seal Design: AB SL, Swirl Type: Right-hand Twist

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber), Inner diameter [mm]: 61, Outer diameter [mm]: 75, Radial Shaft Seal Design: A SL, Swirl Type: Right-hand Twist Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber), Inner diameter [mm]: 61, Outer diameter [mm]: 75, Height [mm]: 8, Radial Shaft Seal Design: A SL, Swirl Type: Right-hand Twist

Inner diameter [mm]: 50, Outer diameter [mm]: 81, Height [mm]: 11,5, Radial Shaft Seal Design: SP, Swirl Type: Right-hand Twist, Material: PTFE (polytetrafluoroethylene), Dust Cover: with dust lip, Supplementary Article/Supplementary Info: with mounting tools General Information: Mounting dry and without any additional oil and grease

Material: PTFE (polytetrafluoroethylene), Inner diameter [mm]: 90, Outer diameter [mm]: 110, Height [mm]: 7, Radial Shaft Seal Design: A SL, Swirl Type: Left-hand Twist

Material: FPM (fluoride rubber), Inner diameter [mm]: 33, Outer diameter [mm]: 47, Height [mm]: 5, Radial Shaft Seal Design: A SL, Swirl Type: Right-hand Twist

Forehead, right screw with powder protective lips Inner diameter [mm]: 40, Outer diameter [mm]: 55, Height [mm]: 6,4, Radial Shaft Seal Design: ASW, Swirl Type: Right-hand Twist, Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber), Dust Cover: with dust lip, Observe mounting information:

PPS/ACM/PTFE Inner diameter [mm]: 35, Radial Shaft Seal Design: SP, Swirl Type: Right-hand Twist, Material: PTFE (polytetrafluoroethylene), Housing Type: with housing, Dust Cover: with dust lip, Observe mounting information:

Material: PTFE (polytetrafluoroethylene), ACM (Polyacrylate), Supplementary Article/Info 2: with mounting sleeve, Inner diameter [mm]: 85, Outer diameter [mm]: 105, Height [mm]: 8,8, Radial Shaft Seal Design: A SL, Swirl Type: Left-hand Twist

Fitting Position: Timing End, Inner diameter 1 [mm]: 42, Outer diameter 1 [mm]: 55, Height 1 [mm]: 7, Material: FPM (fluoride rubber)/ACM (polyacrylate rubber), Dust Cover: with dust lip, Swirl Type: Right-hand Twist

Material: FPM (fluoride rubber), Inner diameter [mm]: 35, Outer diameter [mm]: 48, Height [mm]: 10, Radial Shaft Seal Design: A SL, Swirl Type: Right-hand Twist

Material: PTFE (polytetrafluoroethylene), Inner diameter [mm]: 55, Outer diameter [mm]: 70, Height [mm]: 8, Radial Shaft Seal Design: A SL, Swirl Type: Right-hand Twist

Material: FPM (fluoride rubber), Inner diameter [mm]: 80, Outer diameter [mm]: 98, Height [mm]: 10, Radial Shaft Seal Design: A SL, Swirl Type: Left-hand Twist

106x196/215x15,5/ASW LD IWDR PTFE/AEM Inner Diameter [mm]: 106, Outer Diameter 1 [mm]: 196, Outer Diameter [mm]: 215, Radial Shaft Seal Design: IWD, Swirl Type: Left-hand Twist, Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber), Housing Type: with housing, Supplementary Article/Info 2: with mounting sleeve

Fitting Position: transmission sided, Inner diameter 1 [mm]: 93, Outer diameter 1 [mm]: 139,7, Outer diameter 2 [mm]: 172, Height 1 [mm]: 12, Material: FPM (fluoride rubber), Supplementary Article/Info 2: with flange, with mounting sleeves

Gearbox, left screw, with house, mounting spa Observe mounting information: , Inner Diameter [mm]: 85, Radial Shaft Seal Design: IWD, Swirl Type: Left-hand Twist, Material: PTFE (polytetrafluoroethylene), Housing Type: with housing, Article number of the recommended special tool: VW T10134, Supplementary Article/Info 2: with mounting sleeve

Gearbox, left screw, powder protector, mounting spa Inner Diameter [mm]: 90, Outer Diameter [mm]: 110, Height [mm]: 8, Radial Shaft Seal Design: ASW, Swirl Type: Left-hand Twist, Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber), Dust Cover: with dust lip, Observe mounting information: , Supplementary Article/Info 2: with mounting sleeve

Material: PTFE (polytetrafluoroethylene), ACM (Polyacrylate), Supplementary Article/Info 2: with mounting sleeve, Inner diameter [mm]: 80, Outer diameter [mm]: 100, Height [mm]: 9, Radial Shaft Seal Design: A, Swirl Type: Left-hand Twist

Material: PTFE (polytetrafluoroethylene), ACM (Polyacrylate), Inner diameter [mm]: 40, Outer diameter [mm]: 55, Height [mm]: 6,4, Radial Shaft Seal Design: A SL, Swirl Type: Right-hand Twist